Filter
Top Products
Operational Modes 4-13
L: 4E200 F:9764
Press a Key. . .
3.
Two separate items display:
•
L: Displays the length of the storage space.
•
F: Displays the number of free bytes available.
4.
Press any key to return to the File Sys Menu. Then press the Cancel
key to return to the Supervisor Menu.
Init Space
The initialize space item is used to clear the configuration space or
change the size of the configuration space.
Warning:
Using this command will remove any program or
parameters currently loaded on the 5992.
Note:
Refer to Chapter 2, “
Programming Considerations,
” in your
NCR
5992 Developer’s Guide
for detailed information on the systems file
space.
To change the size of the configuration space, press Enter.
1.
Select the
Init Space
item from the File Sys Menu. The Init Space
Menu displays.
Init Space Menu
Config Space
2.
Press Enter to select the
Config Space
item.
Enter Cfg Size
_
3.
This parameter is used to specify the size of the configuration
space. This parameter is set to zero when the unit is new. For the
IBM EFT application, this value should be set to approximately
260KBytes. Type the configuration size, and press Enter.