Filter
Top Products
Chapter 6: Diagnostics Specification 6-35
Using the NCR 5992 stylus, touch the displayed cross and hold it with
the stylus until you hear a beep. The cross will then move to the next
position, (the bottom left corner of the screen). Continue until all four
corners of the screen have been touched with the stylus.
✎
Note: Avoid touching the glass with your finger or hand while
performing the stylus calibration.
If the ‘Both’ option is selected, the screen will then start over with the
message to “Touch the cross with the finger”. Use your finger and
touch each corner of the screen on the cross as you did with the stylus.
✎
Note: Do not hold the stylus while performing the finger
calibration.
When completed, the screen clears automatically and returns the
DIAGNOSTICS menu. Pressing the Cancel key exits the session and
starts the NCR 5992 application.