Filter
Top Products
Operational Modes 4-3
Supervisor Mode
Startup Sequence
To access the 5992 supervisor mode:
1.
The unit must be powered down.
2.
Power up the unit and immediately place the stylus in the center of
the 5992 display screen. Hold the stylus in this position during the
power up as shown in the illustration below.
3.
The
Supervisor Menu | Diagnostics Menu
selection screen will
display.
Note:
If Supervisor Menu or Diagnostics Menu is not selected
within 10 seconds, the unit exits this screen and starts the 5992
application.
16840
Center of Display