Filter
Top Products
Installation 3-7
5.
Route the cable through the
"L" Shaped Cable Guide
, and push the
cable down through the
Cable Retention Tabs
to hold in place.
Note: The NCR 5992 host cable should be connected after the
stylus. The host cable is thicker and will keep the stylus cable in
place.
Disconnecting the NCR 5992 Host Cable
1.
Place the NCR 5992 in front of you with the bottom of the unit
facing up.
Note: Be careful not to place the unit on a surface where the
graphical display screen can be scratched or damaged.
2.
Gently pull the cable up from the "
L"
Shaped Cable Guide
Retention Tabs.
3.
Hold the connector behind the cover, and gently pull the connector
out of the NCR 5992 Host Port.