Operational Modes 4-15
Note:
Refer to Chapter 2, “
Programming Considerations
” in your
NCR
5992
Developer’s Guide
for detailed information on the systems file
space.
App Config Menu
Init Space
1.
Select the Init Space item from the App Config Menu.
Enter Apps Size
_
2.
This parameter is used to specify the size of the configuration
space. This parameter is set to 128KBytes when the unit is new. For
the IBM EFT application, this value should not have to change.
Type the application configuration size, and press Enter.
Enter Apps Size
Complete
3.
This message displays when the space configuration is completed.
Press any key to return to the App Config Menu. Then press the
Cancel key to return to the Supervisor Menu.
ID Banner
The ID banner option displays the current version level of the 5992
firmware. Select the
ID Banner
item on the Supervisor Menu and press
Enter. The version information displays. Press any key to return to the
Supervisor Menu.
Change Password
The change password option allows the password to access Supervisor
Mode to be changed. Select the
Change Password
item on the Supervisor
Menu and press Enter.
Note:
Changing the Supervisor Mode password does not affect the
Diagnostics Mode password.