Filter
Top Products
Page B-2 NDA-24230 Issue 2.0
Appendix B VisuaLink 128/384 User Guide
Environmental Initialize
1. Press the
MENU
button on the Wireless remote controller.
2. Using the wireless remote controller select the On-Screen ICON labeled
SETTING ENVIRONMENTS
.
3. Press the
ENTER
button.
4. Enter the
PASSWORD
and then press the
ENTER
button on the wireless
controller.
5. Using the wireless remote controller select the On-Screen ICON labeled
MAINTENANCE
.
6. Press the
ENTER
button.
7. Locate the
PAGE UP
button on the wireless remote controller. Press the
button once.
8. Using the wireless remote controller select the Environmental Initialize.
9. When the environmental initialize is complete, the system asks you to restart
the system.
10. Restart the system.
VisuaLink Software Revision History
The VisuaLink Software Revison History is located at the following Web
site:
http://www.cng.nec.com/html/products.htm
1. Click on the NTAC icon or select SUPPORT from the menu bar
at the top of the screen.
2. At the CNG SUPPORT screen, click on the NTAC Online
text.
3. At the National Technical Assistance Center screen, click on the
Knowledge Base icon or the Knowledge Base text on
the menu bar.
4. At the Knowledge Base screen, Click on the here that is highlighted in
blue on the line "For Frequently Asked Questions (FAQs), click here".
5. Click on the VisuaLink Software Revision History text that is in blue.
This will take you to the revision history.
Note:
If you have a problem with this procedure, please call the NTAC
support line at 1-800-852-4632.