Filter
Top Products
Page 6-2 NDA-24230 Issue 2.0
Chapter 6 VisuaLink 128/384 User Guide
Checking Operation
Verify that local and remote sites are able to be seen and heard at the remote ends.
Verify that a control from the remote controller is normal by referring to
Chapter 8 Operation Method
.
If unable to connect to the remote site it maybe because the remote site is busy,
wait and then repeat the above operation. If the operation persist, proceed to
Chapter 9 Troubleshooting
.
➂
Enter the first telephone number using the
NUMBER
buttons,.
Note 1:
When pressing down side on
CAMERA CONTROL
button after the
first number is completed, the number is copied to
PHONE NUMBER 2
.
This is done because typically when dialing two (2) BRI numbers, the
PHONE NUMBER 2
number sometimes exactly match or is similar to
the first number.
Note 2:
At any time you may press the
CALL
button and
ENTER
button. This
will immediately place a video call to the far-end.
Place Manual Dial Call
Phone Number 1
[ ]
Phone Number 2
[ ]
Speed : <128kb/s>
Press ENTER or CALL after entering
Press CANCEL to go to Call Screen
▲
ENTER
NUMBER