NEC 128/384 Network Card User Manual


 
NDA-24230 Issue 2.0 Page 4-1
VisuaLink 128/384 User Guide Chapter 4
Chapter 4 Application Setup
4.1 Guidelines
The following are key points when installing the VisuaLink.
(1) The VisuaLink should be installed on a flat surface. It is not recommended
that the unit be installed on its side.
(2) Please allow for 2 inches (6 centimeters) on both sides of the equipment for
ventilation.
(3) Allow the front of the unit to be visible.
The following are the specifications for the IR receiver/transmitter.
(1) The receiver is able to receive an IR signal up to 20 feet (6 meters).
(2) The IR receiver should be able to receive a signal at an angle of 30
degrees
or less from the left to right.
(3) The IR receiver should be able to receive a signal at an angle of 15 degrees
or less from the top to bottom.
Please place only light objects on the equipment such as a telephone.