NETGEAR D6100 Network Router User Manual


 
Manage the WAN and LAN Network Settings
132
AC1200 WiFi DSL Modem Router—Essentials Edition Model D6100
To enable and configure the VLAN:
1. Launch an Internet browser from a computer or WiFi device that is connected to the
network.
2. Type http://www
.routerlogin.net.
A login screen displays.
3. Enter the user name and password for the modem router.
The user name is admin.
The default password is
password. The user name and
password are case-sensitive.
4. Click the OK button.
The BASIC Home screen displays.
5. Select ADVANCED > Setup > W
AN Setup.
The WAN Setup screen displays.
6. Select the Enable VLAN check box.
7. Enter a VLAN ID.
The VLAN ID can be in a range from 0 to 4095. The default VLAN ID is 0.
8. Click the Apply button.
Your settings are saved.
Manage the SIP Application-Level Gateway
The application-level gateway (ALG) for the Session Initiation Protocol (SIP) is enabled by
default for enhanced address and port translation. However, some types of VoIP and video
traffic might not work well when the SIP ALG is enabled. For this reason, the modem router
provides the option to disable the SIP ALG.
To change the default SIP ALG setting:
1. Launch an Internet browser from a computer or WiFi device that is connected to the
network.
2. T
ype http://www
.routerlogin.net.
A login screen displays.
3. Enter the user name and password for the modem router.
The user name is admin.
The default password is
password. The user name and
password are case-sensitive.
4. Click the OK button.
The BASIC Home screen displays.
5. Select ADVANCED > Setup > W
AN Setup.