Filter
Top Products
Manage the Internet Settings Manually
47
AC1200 WiFi DSL Modem Router—Essentials Edition Model D6100
8. Click the Apply button.
Your settings are saved.
9. Click the Test button to test your Internet connection.
If the NETGEAR website does not display within one minute, see T
roubleshoot the
Internet Connection on page 210.
Use Static IP Address Enter the IP address, IP subnet mask, and gateway IP address that your
ISP assigned for static IP address service. The gateway is the ISP router to
which your modem router connects.
Use IP over ATM (IPoA) Enter the IP address, IP subnet mask, and gateway IP address that your
ISP assigned for IPoA service.
The gateway is the ISP router to which your
modem router connects.
Domain Name Server (DNS)
Address
The DNS server is used to look up site addresses based on their names.
Get Automatically from ISP Your ISP uses DHCP to assign your DNS servers. Your ISP automatically
assigns this address.
Use These DNS Servers If you know that your ISP does not automatically transmit DNS addresses
to the modem router during login, select this option and enter the IP
address of your ISP primary DNS server
. If a secondary DNS server
address is available, enter it also.
Router MAC
Address
The Ethernet MAC address that the modem router uses on the Internet port. Some ISPs register the MAC
address of the network interface card in your computer when your account is first opened.
They accept
traf
fic only from the MAC address of that computer. This feature allows your modem router to use your
computer’s MAC address (also called cloning).
Use Default Address Use the default MAC address.
Use Computer MAC Address The modem router captures and uses the MAC address of the computer
that you are now using.
Y
ou must use the one computer that is registered
by the ISP.
Use This MAC Address Enter the MAC address that you want to use.
NAT (Network Address Translation)
NAT allows computers on your home network to share the modem router Internet connection. NAT is
enabled by default because it is needed in most situations. Select the NA
T setting:
• Enable. NA
T is enabled. This is the default setting.
• Disable. NAT is disabled.
Field Description