Filter
Top Products
Switching Commands
128
ProSafe M4100 and M7100 Managed Switches
Separate non-consecutive IDs with a comma (,), and do not insert spaces or zeros in
between the range. Use a dash (–) for the range.
Format dhcp l2relay circuit-id vlan <vlan-list>
Mode
no dhcp l2relay circuit-id vlan
Use this parameter to clear the DHCP Option-82 Circuit ID for a VLAN.
Format no dhcp l2relay circuit-id vlan <vlan-list>
Mode
dhcp l2relay remote-id vlan
Use this parameter to set the DHCP Option-82 Remote ID for a VLAN and subscribed service
(based on subscription-name). The vlan–list range is 1–4093. Separate non-consecutive IDs
with a comma (,), and do not insert spaces or zeros between the range. Use a dash (–) for
the range.
Format dhcp l2relay remote-id <remote-id-string> vlan <vlan-list>
Mode
no dhcp l2relay remote-id vlan
Use this parameter to clear the DHCP Option-82 Remote ID for a VLAN and subscribed
service (based on subscription-name).
Format no dhcp l2relay remote-id vlan vlan-list
Mode
dhcp l2relay vlan
Use this command to enable the DHCP L2 Relay agent for a set of VLANs. All DHCP packets
which arrive on interfaces in the configured VLAN are subject to L2 Relay processing.
vlan–list range is 1–4093. Separate non-consecutive IDs with a comma (,), and do not insert
spaces or zeros between the range. Use a dash (–) for the range.
Default
Format dhcp l2relay vlan <vlan-list>
Mode
Global Config
Global Config
Global Config
Global Config
disabled
Global Config