Filter
Top Products
Quality of Service (QoS) Commands
462
ProSafe M4100 and M7100 Managed Switches
drop
This command specifies that all packets for the associated traffic stream are to be dropped at
ingress.
Format drop
Mode
Incompatibilities
mirror
This command specifies that all incoming packets for the associated traffic stream are copied
to a specific egress interface (physical port or LAG).
Format mirror <slot/port>
Mode
Incompatibilities
redirect
This command specifies that all incoming packets for the associated traffic stream are
redirected to a specific egress interface (physical port or port-channel).
Format redirect <slot/port>
Mode
Incompatibilities
conform-color
Use this command to enable color-aware traffic policing and define the conform-color class
map. Used with the police command where the fields for the conform level are specified. The
<class-map-name> parameter is the name of an existing DiffServ class map.
Note: This command might only be used after specifying a police
command for the policy-class instance.
Policy-Class-Map Config
Assign Queue, Mark (all forms), Mirror, Police, Redirect
Policy-Class-Map Config
Drop, Redirect
Policy-Class-Map Config
Drop, Mirror
Format conform-color <class-map-name>
Mode
Policy-Class-Map Config