![](http://pdfasset.owneriq.net/4/0a/40a9a959-0d5f-4b4a-9bb4-1283e2b5351e/40a9a959-0d5f-4b4a-9bb4-1283e2b5351e-bg2e0.png)
Green Ethernet Commands
736
ProSafe M4100 and M7100 Managed Switches
green-mode energy-detect
Use this command enables energy-detect mode on an interface or on all the interfaces.
Format green-mode energy-detect
Mode
Default
no green-mode energy-detect
This command disables energy-detect mode on an interface or on all the interfaces.
Format no green-mode energy-detect
Mode
green-mode eee
This command enables EEE low-power idle mode on an interface or on all interfaces. It
allows both send and receive sides of a link to disable some functionality for power savings
when the port is lightly loaded. Transition to Low-Power Mode does not change the link
status. Frames in transit are not dropped or corrupted in transition to and from Low-Power
Mode.
Format green-mode eee
Mode
Default
no green-mode eee
This command disables EEE.
Format no green-mode eee
Mode
Interface Config
Interface Range Config
Disabled
Interface Config
Interface Range Config
Interface Config
Interface Range Config
Disabled
Interface Config
Interface Range Config