Filter
Top Products
Utility Commands
562
ProSafe M4100 and M7100 Managed Switches
show sntp client
This command is used to display SNTP client settings.
Format show sntp client
Mode
Client
Supported
Modes
SNTP Version
Port
Client Mode
show sntp server
This command is used to display SNTP server settings and configured servers.
Format show sntp server
Mode
Server Host
Address
Server Type
Server Stratum
Server
Reference ID
Server Mode
Server
Maximum
Entries
Server Current
Entries
Broadcast
Count
Current number of unsolicited broadcast messages that have been received and
processed by the SNTP client since last reboot.
Multicast Count
Current number of unsolicited multicast messages that have been received and
processed by the SNTP client since last reboot.
Privileged EXEC
Term Definition
Supported SNTP Modes (Broadcast, Unicast, or Multicast).
The highest SNTP version the client supports.
SNTP Client Port.
Configured SNTP Client Mode.
Privileged EXEC
Term Definition
IP address or hostname of configured SNTP Server.
Address Type of Server.
Claimed stratum of the server for the last received valid packet.
Reference clock identifier of the server for the last received valid packet.
SNTP Server mode.
Total number of SNTP Servers allowed.
Total number of SNTP configured.
Term Definition