Filter
Top Products
IPv6 Commands
392
ProSafe M4100 and M7100 Managed Switches
clear ipv6 ospf neighbor interface
To drop adjacency with all neighbors on a specific interface, use the optional parameter
[slot/port]. To drop adjacency with a specific router ID on a specific interface, use the optional
parameter [neighbor-id].
Format clear ipv6 ospf neighbor interface [slot/port] [neighbor-id]
Mode
clear ipv6 ospf redistribution
Use this command to flush all self-originated external LSAs. Reapply the redistribution
configuration and reoriginate prefixes as necessary.
Format clear ipv6 ospf redistribution
Mode
default-information originate (OSPFv3)
This command is used to control the advertisement of default routes.
Default
• metric—unspecified
• type—2
Format default-information originates [always] [metric <1-16777214>]
[metric-type {1 | 2}]
Mode
no default-information originates (OSPFv3)
This command is used to control the advertisement of default routes.
Format no default-information originates [metric] [metric-type]
Mode
default-metric (OSPFv3)
This command is used to set a default for the metric of distributed routes.
Format default-metric <1-16777214>
Mode
Privileged EXEC
Privileged EXEC
Router OSPFv3 Config
Router OSPFv3 Config
Router OSPFv3 Config