NETGEAR M4100-12GF Switch User Manual


 
Routing Commands
237
ProSafe M4100 and M7100 Managed Switches
Link Speed Data Rate........................... Inactive
MAC address.................................... 02:14:6C:FF:00:DE
Encapsulation Type............................. Ethernet
IP MTU......................................... 1500
Bandwidth...................................... 100000 kbps
Destination Unreachables....................... Enabled
ICMP Redirects................................. Disabled
show ip interface brief
This command displays summary information about IP configuration settings for all ports in
the router.
Format show ip interface brief
Modes
• Privileged EXEC
• User EXEC
Interface
State
IP Address
IP Mask
Netdir Bcast
MultiCast Fwd
Method
show ip protocols
This command lists a summary of the configuration and status for each unicast routing
protocol. The command lists routing protocols that are configured and enabled. If a protocol
is selected on the command line, the display is limited to that protocol.
Format
show ip protocols [ospf | rip]
Mode
Term Definition
Valid slot and port number separated by forward slashes.
Routing operational state of the interface.
The IP address of the routing interface in 32-bit dotted decimal format.
The IP mask of the routing interface in 32-bit dotted decimal format.
Indicates if IP forwards net-directed broadcasts on this interface. Possible values are
Enable or Disable.
The multicast forwarding administrative mode on the interface. Possible values are
Enable or Disable.
Shows whether the IP address was configured manually or acquired from a DHCP
server
.
Privileged EXEC
Parameter Description
OSPFv2
Router ID The router ID configured for OSPFv2
OSPF Admin Mode Whether OSPF is enabled or disabled globally