Filter
Top Products
Switching Commands
209
ProSafe M4100 and M7100 Managed Switches
Example: The following shows example CLI display output for the command.
(Switch) #show isdp neighbors detail
Device ID 0001f45f1bc0
Address(es):
IP Address: 10.27.7.57
Capability Router Trans Bridge Switch IGMP
Platform SecureStack C2
Interface 0/48
Port ID ge.3.14
Holdtime 131
Advertisement Version 2
Entry last changed time 0 days 00:01:59
Version : 05.00.56
show isdp traffic
This command displays ISDP statistics.
Format
Mode
Term Definition
Device ID
The device ID associated with the neighbor which advertised the information.
IP Addresses
The IP addresses associated with the neighbor.
Capability
ISDP functional capabilities advertised by the neighbor.
Platform
The hardware platform advertised by the neighbor.
Interface
The interface (slot/port) on which the neighbor's advertisement was received.
Port ID
The port ID of the interface from which the neighbor sent the advertisement.
Hold Time
The hold time advertised by the neighbor.
Advertisement
Version
The version of the advertisement packet received from the neighbor.
Entry Last
Changed Time
Displays when the entry was last modified.
Version
The software version that the neighbor is running.
show isdp traffic
Privileged EXEC
Term Definition
ISDP Packets Received
Total number of ISDP packets received
ISDP Packets Transmitted
Total number of ISDP packets transmitted
ISDPv1 Packets Received
Total number of ISDPv1 packets received