Filter
Top Products
Quality of Service (QoS) Commands
454
ProSafe M4100 and M7100 Managed Switches
no class-map
This command eliminates an existing DiffServ class. The <class-map-name> is the name
of an existing Dif
fServ class. (The class name ‘default’ is reserved and is not allowed here.)
This command might be issued at any time; if the class is currently referenced by one or
more policies or by any other class, the delete action fails.
Format no class-map <class-map-name>
Mode
class-map rename
This command changes the name of a DiffServ class. The <class-map-name> is the
name of an existing DiffServ class. The <new-class-map-name> parameter is a
case-sensitive alphanumeric string from 1 to 31 characters uniquely identifying the class.
Default
Format class-map rename <class-map-name> <new-class-map-name>
Mode
match ethertype
This command adds to the specified class definition a match condition based on the value of
the ethertype. The <ethertype> value is specified as one of the following keywords:
appletalk, arp, ibmsna, ipv4, ipv6, ipx, mplsmcast, mplsucast, netbios,
novell, pppoe, rarp or as a custom ethertype value in the range of 0x0600-0xFFFF.
Format match ethertype {<keyword> | custom <0x0600-0xFFFF>}
Mode
match any
This command adds to the specified class definition a match condition whereby all packets
are considered to belong to the class.
Default
Format match any
Mode
Global Config
none
Global Config
Class-Map Config
Ipv6-Class-Map Config
none
Class-Map Config
Ipv6-Class-Map Config