NETGEAR M4100-12GF Switch User Manual


 
Routing Commands
267
ProSafe M4100 and M7100 Managed Switches
of candidate causes the router to participate in the translator election process when it
attains a border router status.
Format area <areaid> nssa translator-role {always | candidate}
Mode
no area nssa translator (OSPF)
This command disables the nssa translator role from the specified area id.
Format no area <areaid> nssa translator-role {always | candidate}
Mode
area nssa translator-stab-intv (OSPF)
This command configures the translator <stabilityinterval> of the NSSA. The
<stabilityinterval> is the period of time that an elected translator continues to
perform its duties after it determines that its translator status has been deposed by another
router.
Format area <areaid> nssa translator-stab-intv <stabilityinterval>
Mode
no area nssa translator-stab-intv (OSPF)
This command disables the nssa translator’s <stabilityinterval> from the specified
area id.
Format no area <areaid> nssa translator-stab-intv <stabilityinterval>
Mode
area range (OSPF)
Use this command in Router Configuration mode to configure a summary prefix that an area
border router advertises for a specific area.
Default
Format
area areaid range prefix netmask {summarylink |
nssaexternallink} [advertise | not-advertise] [cost cost]
Mode
Router OSPF Config
Router OSPF Config
Router OSPF Config
Router OSPF Config
No area ranges are configured by default. No cost is configured by default.
OSPFv2 Router Configuration