NETGEAR M4100-12GF Switch User Manual


 
IPv6 Commands
385
ProSafe M4100 and M7100 Managed Switches
no area nssa(OSPFv3)
This command disables nssa from the specified area id.
Format no area <areaid> nssa
Mode
area nssa default-info-originate (OSPFv3)
This command configures the metric value and type for the default route advertised into the
NSSA. The optional metric parameter specifies the metric of the default route and is to be in
a range of 1-16777214. If no metric is specified, the default value is 10. The metric type can
be comparable (nssa-external 1) or non-comparable (nssa-external 2).
Format area <areaid> nssa default-info-originate [<metric>] [{comparable |
non-comparable}]
Mode
no area nssa default-info-originate (OSPFv3)
This command disables the default route advertised into the NSSA.
Format no area <areaid> nssa default-info-originate [<metric>] [{comparable
| non-comparable}]
Mode
area nssa no-redistribute (OSPFv3)
This command configures the NSSA ABR so that learned external routes will not be
redistributed to the NSSA.
Format area <areaid> nssa no-redistribute
Mode
no area nssa no-redistribute (OSPFv3)
This command disables the NSSA ABR so that learned external routes are redistributed to
the NSSA.
Format no area <areaid> nssa no-redistribute
Mode
Router OSPFv3 Config
Router OSPFv3 Config
Router OSPF Config
Router OSPFv3 Config
Router OSPF Config