NETGEAR M4100-12GF Switch User Manual


 
IPv6 Commands
402
ProSafe M4100 and M7100 Managed Switches
The following OSPF NSSA-specific information displays only if the area is configured as an
NSSA.
Import
Summary LSAs
Redistribute
into NSSA
Default
Information
Originate
Default Metric
Default Metric
Type
Translator Role
Translator
Stability Interval
Translator State
show ipv6 ospf asbr
This command displays the internal OSPFv3 routes to reach Autonomous System Boundary
Routers (ASBR). This command takes no options.
Format show ipv6 ospf asbr
Modes
• Privileged EXEC
• User EXEC
Stub Mode
Represents whether the specified Area is a stub area or not. The possible values are
enabled and disabled. This is a configured value.
Import
Summary LSAs
Shows whether to import summary LSAs (enabled).
OSPF Stub
Metric Value
The metric value of the stub area. This field displays only if the area is a configured as a
stub area.
Term Definition
Shows whether to import summary LSAs into the NSSA.
Shows whether to redistribute information into the NSSA.
Shows whether to advertise a default route into the NSSA.
The metric value for the default route advertised into the NSSA.
The metric type for the default route advertised into the NSSA.
The NSSA translator role of the ABR, which is always or candidate.
The amount of time that an elected translator continues to perform its duties after it
determines that its translator status has been deposed by another router
.
Shows whether the ABR translator state is disabled, always, or elected.
Term Definition
Type
The type of the route to the destination. It can be either:
• intra — Intra-area route
• inter — Inter-area route
Router ID
Router ID of the destination.
Term Definition