Filter
Top Products
Switching Commands
144
ProSafe M4100 and M7100 Managed Switches
no ip arp inspection filter
Use this command to unconfigure the ARP ACL used to filter invalid ARP packets on a list of
comma-separated VLAN ranges.
Format no ip arp inspection filter acl-name vlan vlan-list [static]
Mode
arp access-list
Use this command to create an ARP ACL.
Format arp access-list acl-name
Mode
no arp access-list
Use this command to delete a configured ARP ACL.
Format no arp access-list acl-name
Mode
permit ip host mac host
Use this command to configure a rule for a valid IP address and MAC address combination
used in ARP packet validation.
Format permit ip host sender-ip mac host sender-mac
Mode
no permit ip host mac host
Use this command to delete a rule for a valid IP and MAC combination.
Format no permit ip host sender-ip mac host sender-mac
Mode
show ip arp inspection
Use this command to display the Dynamic ARP Inspection global configuration and
configuration on all the VLANs. With the vlan-list argument (that is, comma-separated VLAN
ranges), the command displays the global configuration and configuration on all the VLANs in
Global Config
Global Config
Global Config
ARP Access-list Config
ARP Access-list Config