Filter
Top Products
Switching Commands
156
ProSafe M4100 and M7100 Managed Switches
show igmpsnooping mrouter interface
This command displays information about statically configured ports.
Format show igmpsnooping mrouter interface <slot/port>
Mode
Interface
Multicast
Router
Attached
VLAN ID
show igmpsnooping mrouter vlan
This command displays information about statically configured ports.
Format show igmpsnooping mrouter vlan <slot/port>
Mode
Interface
VLAN ID
Fast Leave
Mode
Indicates whether IGMP Snooping Fast-leave is active on the VLAN.
Group
Membership
Interval
The amount of time in seconds that a switch will wait for a report from a particular group
on a particular interface, which is participating in the VLAN, before deleting the interface
from the entry
. This value may be configured.
Maximum
Response Time
The amount of time the switch waits after it sends a query on an interface, participating in
the VLAN, because it did not receive a report for a particular group on that interface.
This
value may be configured.
Multicast
Router Expiry
Time
The amount of time to wait before removing an interface that is participating in the VLAN
from the list of interfaces with multicast routers attached.
The interface is removed if a
query is not received. This value may be configured.
Privileged EXEC
Term Definition
The port on which multicast router information is being displayed.
Indicates whether multicast router is statically enabled on the interface.
The list of VLANs of which the interface is a member.
Privileged EXEC
Term Definition
The port on which multicast router information is being displayed.
The list of VLANs of which the interface is a member.
Term Definition