Filter
Top Products
Routing Commands
274
ProSafe M4100 and M7100 Managed Switches
clear ip ospf configuration
Use this command to reset the OSPF configuration to factory defaults.
Format clear ip ospf configuration
Mode
clear ip ospf counters
Use this command to reset global and interface statistics.
Format clear ip ospf counters
Mode
clear ip ospf neighbor
Use this command to drop the adjacency with all OSPF neighbors. On each neighbor’s
interface, send a one way hello. Adjacencies might then be reestablished. To drop all
adjacencies with a specific router ID, specify the neighbor’s Router ID using the optional
parameter [neighbor-id].
Format clear ip ospf neighbor [neighbor-id]
Mode
clear ip ospf neighbor interface
To drop adjacency with all neighbors on a specific interface, use the optional parameter
[slot/port]. To drop adjacency with a specific router ID on a specific interface, use the optional
parameter [neighbor-id].
Format clear ip ospf neighbor interface [slot/port] [neighbor-id]
Mode
clear ip ospf redistribution
Use this command to flush all self-originated external LSAs. Reapply the redistribution
configuration and reoriginate prefixes as necessary.
Format clear ip ospf redistribution
Mode
clear ip ospf stub-router
OSPF can enter stub router mode due to resource exhaustion (too many LSAs, too many
routes, memory allocation failures, and so on). When this happens, the user can get out of
this mode by issuing the command after the cause of the overload has been resolved.
Privileged EXEC
Privileged EXEC
Privileged EXEC
Privileged EXEC
Privileged EXEC