Filter
Top Products
Quality of Service (QoS) Commands
498
ProSafe M4100 and M7100 Managed Switches
• When aging time is increased - Current sessions will be timed out according to the new
value.
• When aging time is decreased -
Any sessions that have been dormant for a time
exceeding the new setting will be immediately deleted from the table. All other sessions
will continue to be monitored against the new time-out value.
Format iscsi aging time <time>
Mode
Default
time
no iscsi aging time
This command is to reset the aging time to the default.
Format no iscsi aging time
Mode
show iscsi
This command displays the iSCSI settings.
Format show iscsi
Mode
• Privileged EXEC
• User EXEC
Example:
The following example displays the iSCSI settings.
Console # show iscsi
iSCSI enabled
iSCSI vpt is 5, remark
Session aging time: 60 min
Maximum number of sessions is 256
-----------------------------------------------------------
iSCSI targets and TCP ports:
---------------------------
TCP Port Target IP Address Name
860
3260
5000
30001 172.16.1.1 iqn.1993-11.com.disk-vendor:diskarrays.sn.45678.tape:sys1.xyz
30033 172.16.1.10
30033 172.16.1.25
Global Config
5 minutes
Term Definition
The number in minutes a session is not active prior to its removal. (Range: 1-43,200)
Global Config