Filter
Top Products
Management Commands
695
ProSafe M4100 and M7100 Managed Switches
keyword. In the show running config command’s display, these secret keys are displayed in
encrypted format. You cannot show these keys in plain text format.
Format tacacs-server key [<key-string> | encrypted <key-string>]
Mode
no tacacs-server key
Use the no tacacs-server key command to disable the authentication and encryption
key for all
TACACS+ communications between the switch and the TACACS+ daemon. The
<key-string> parameter has a range of 0–128 characters This key must match the key
used on the TACACS+ daemon.
Format no tacacs-server key <key-string>
Mode
tacacs-server keystring
Use this command to set the global authentication encryption key used for all TACACS+
communications between the TACACS+ server and the client.
Format
tacacs-server keystring
Mode
tacacs-server source interface
Use this command in Global Configuration mode to configure the global source interface
(Source IP selection) for all TACACS+ communications between the TACACS+ client and
the server.
Format
tacacs-server source-interface {<slot/port> | loopback
<loopback-id> | VLAN <vlan-id>}
Mode
Global Config
Global Config
Global Config
Global Config
Parameter Description
slot/port The unit identifier assigned to the switch.
loopback-id The loopback interface. The range of the loopback ID is 0–7.
vlan-id The vlan id. The range of the vlan ID is 1–4,093.