Filter
Top Products
Switching Commands
181
ProSafe M4100 and M7100 Managed Switches
show lldp remote-device
Use this command to display summary information about remote devices that transmit
current LLDP data to the system. You can show information about LLDP remote data
received on all ports or on a specific port.
Format show lldp remote-device {<slot/port> | all}
Mode
Local Interface
RemID
Chassis ID
Port ID
System Name
Example: The following shows example CLI display output for the command.
(switch) #show lldp remote-device all
LLDP Remote Device Summary
Local
Interface RemID Chassis ID Port ID System Name
------- ------- -------------------- ------------------ ------------------
0/1
0/2
0/3
0/4
0/5
0/6
0/7 2 00:FC:E3:90:01:0F 00:FC:E3:90:01:11
0/7 3 00:FC:E3:90:01:0F 00:FC:E3:90:01:12
0/7 4 00:FC:E3:90:01:0F 00:FC:E3:90:01:13
0/7 5 00:FC:E3:90:01:0F 00:FC:E3:90:01:14
0/7 1 00:FC:E3:90:01:0F 00:FC:E3:90:03:11
0/7 6 00:FC:E3:90:01:0F 00:FC:E3:90:04:11
0/8
0/9
0/10
0/11
0/12
--More-- or (q)uit
Privileged EXEC
Term Definition
The interface that received the LLDPDU from the remote device.
An internal identifier to the switch to mark each remote device to the system.
The ID that is sent by a remote device as part of the LLDP message, it is usually a MAC
address of the device.
The port number that transmitted the LLDPDU.
The system name of the remote device.