Filter
Top Products
Quality of Service (QoS) Commands
489
ProSafe M4100 and M7100 Managed Switches
time zone. The [start time date] parameters indicate the time and date at which the
configuration that referenced the time range starts going into effect. The time is expressed in
a 24-hour clock, in the form of hours:minutes. For example, 8:00 is 8:00 am and 20:00 is 8:00
pm. The date is expressed in the format day month year. If no start time and date are
specified, the configuration statement is in effect immediately. The
[end time date]
parameters indicate the time and date at which the configuration that referenced the time
range is no longer in effect. The end time and date must be after the start time and date. If no
end time and date are specified, the configuration statement is in effect indefinitely.
Format absolute {[start time date] [end time date]}
Mode
no absolute
Use this command to delete the absolute time entry in the time range.
Format no absolute
Mode
periodic
Use this command to add a periodic time entry to a time range. The time parameter is based
off the currently configured time zone. The first occurrence of the
days-of-the-week
argument is the starting day(s) from which the configuration that referenced the time range
starts going into effect. The second occurrence is the ending day or days from which the
configuration that referenced the time range is no longer in effect. If the end days-of-the-week
are the same as the start, they can be omitted This argument can be any single day or
combinations of days: Monday, Tuesday, Wednesday, Thursday, Friday, Saturday, Sunday.
Other possible values are:
• daily—Monday through Sunday
• weekdays—Monday through Friday
• weekend—Saturday and Sunday
If the ending days of the week are the same as the starting days of the week, they can be
omitted.
The first occurrence of the
time argument is the starting hours:minutes which the
configuration that referenced the time range starts going into effect. The second occurrence
is the ending hours:minutes at which the configuration that referenced the time range is no
longer in effect. The hours:minutes are expressed in a 24-hour clock. For example, 8:00 is
8:00 am and 20:00 is 8:00 pm
The frequency is how often this periodic entry will become active. If the value is set to 0, the
timer schedule will be treated as absolute.
Format periodic <frequency> {days-of-the-week time} to {[days-of-the-week] time}
Mode
Time-Range Config
Time-Range Config
Time-Range Config