Filter
Top Products
Switching Commands
178
ProSafe M4100 and M7100 Managed Switches
no lldp notification
Use this command to disable notifications.
Default
Format no lldp notification
Mode
lldp notification-interval
Use this command to configure how frequently the system sends remote data change
notifications. The <interval> parameter is the number of seconds to wait between sending
notifications. The valid interval range is 5-3600 seconds.
Default
Format lldp notification-interval <interval>
Mode
no lldp notification-interval
Use this command to return the notification interval to the default value.
Format no lldp notification-interval
Mode
clear lldp statistics
Use this command to reset all LLDP statistics, including MED-related information.
Format clear lldp statistics
Mode
clear lldp remote-data
Use this command to delete all information from the LLDP remote data table, including
MED-related information.
Format clear lldp remote-data
Mode
disabled
Interface Config
5
Global Config
Global Config
Privileged Exec
Global Config