Filter
Top Products
Management Commands
670
ProSafe M4100 and M7100 Managed Switches
clear aaa ias-users
Use this command to remove all users from the IAS database.
Format clear aaa ias-users
Mode
show aaa ias-users
Use this command to display configured IAS users and their attributes. Passwords
configured are not shown in the show command output.
Format show aaa ias-users
Mode
SNMP Commands
This section describes the commands you use to configure Simple Network Management
Protocol (SNMP) on the switch. You can configure the switch to act as an SNMP agent so
that it can communicate with SNMP managers on your network.
snmp-server
Use this command to set the name and the physical location of the switch and the
organization responsible for the network. The range for <name>, <loc> and <con> is from 1
to 31 alphanumeric characters.
Default
Format snmp-server {sysname <name> | location <loc> | contact <con>}
Mode
snmp-server community
Use this command to add (and name) a new SNMP community. A community <name> is a
name associated with the switch and with a set of SNMP managers that manage it with a
specified privileged level. The length of <name> can be up to 16 case-sensitive characters.
Note: Community names in the SNMP Community Table must be unique.
When making multiple entries using the same community name, the
first entry is kept and processed and all duplicate entries are
ignored.
Privileged EXEC
Privileged EXEC
none
Global Config