Filter
Top Products
100 Configuring the domain
/cfg/domain #/server/trace
followed by:
specify. You are prompted to enter the
required information. You can specify the
file exchange server using either the host
name or the IP address.
For TFTP, the number of files sent depends
on the amount of captured information. A
sequence number is appended to the file
name given in the CLI, starting at 1 and
incremented automatically for additional
files.
For ftp and sftp, you will also be
prompted to specify a user name and
password valid on the file exchange server.
The default output mode is interactive.
tcpdump
Creates a dump of the TCP traffic flowing
between clients and the virtual SSL server.
You are prompted to enter the following
information:
• tcpdump flags and tcpdump
filter—for more information about
the flags and filter expressions available for
TCPDUMP using UNIX, see h
ttp://www.tcp
dump.org/tcpdump_man.html.
•
output mode
Options for the output mode are:
•
interactive—captured information on
the screen
• tftp|ftp|sftp—the dump will be saved
as a file to the file exchange server you
specify, using a destination file name you
specify. You are prompted to enter the
required information. You can specify the
file exchange server using either the host
name or the IP address.
For TFTP, the number of files sent depends
on the amount of captured information. A
sequence number is appended to the file
name given in the CLI, starting at 1 and
incremented automatically for additional
files.
For ftp and sftp, you will also be
prompted to specify a user name and
password valid on the file exchange server.
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.