Filter
Top Products
Customizing the portal and logon 253
/cfg/doamin #/linkset <linkset ID>
followed by:
autorun true|false
Specifies whether autorun support is
enabled or disabled. The options are:
• true—autorun is enabled
• false—autorun is disabled
If enabled, all links defined for the linkset
execute automatically after the client
has been authenticated. No links for this
linkset display on the portal Home tab.
The default is disabled.
For more information about the type of
links you can configure, see “Linksets and
links” (page 234).
link <index> Accesses the Link menu, in order to
create or configure links for the linkset (see
“Configuring links” (page 253)).
To view existing linksets, press TAB
following the link command.
del
Removes the linkset from the current
configuration.
Configuring links
To create and configure the links included in the linkset, use the following
command:
/cfg/doamin #/linkset <linkset ID> /link <index>
where
index is an integer in the range 1 to 256 that
indicates the position of the link in the
linkset.
When you first create the link, if you do not specify the index in the
command, you will be prompted to enter the index or name. You must
enter the index for the new link. You will then be prompted to enter the
following parameters:
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.