Filter
Top Products
162 Configuring groups and profiles
Table 25
Configuring group 1
cfg/domain #/aaa/group 1/cachepass
Usage
cachepass : true|false
Table 26
Configuring group 1
cfg/domain #/aaa/group 1/syscredent/
User
Set the system username.
passwd
Set the system password.
prevuser
Set the systems previous username.
prevpasswd
Systems previous password.
actdate
New password effective date.
earplush
exprprev
updclients
reset
ena
dis
Configuring client filters
To create and configure a client filter, use the following command:
/cfg/doamin #/aaa/filter <filter ID>
where
filter ID is an integer in the range 1 to 63 that
uniquely identifies the filter in the Nortel
SNAS domain.
When you first create the filter, you must enter the filter ID. After you have
created the filter, you can use either the ID or the name to access the filter
for configuration.
When you first create the filter, you are prompted to enter the client filter
name.
The Client Filter menu appears.
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.