Filter
Top Products
110 Configuring the domain
followed by:
interface <interface
ID>
References a previously created interface to
serve as a backend interface for the domain.
• interface ID is an integer that indicates
the interface number. The default is 0.
To configure the interface, use the
/cfg/sys/host #/interface command
(see “Configuring host interfaces” (page 268)).
log
Specifies the type of requests and operations
to log. You are prompted to enter a
comma-separated list of log types. Valid
options are:
•
all—logs all options
• login—logs portal logins and logouts
• http—logs HTTP requests made from the
portal
• portal—logs non-HTTP portal operations,
such as FTP and SMB file server access
• reject—logs rejected requests
The default is login.
Each type of log generates its own set of
syslog messages. The syslog messages
include date, time, type of request, user,
source IP address, and requested destination.
Configuring RADIUS accounting
The Nortel SNAS can be configured to provide support for logging
administrative operations and user session start and stop messages to a
RADIUS accounting server.
With RADIUS accounting enabled, the Nortel SNAS sends an accounting
request start packet to the accounting server for each user who
successfully authenticates to the Nortel SNAS domain. The start packet
contains the following information:
• client user name
• Nortel SNAS device Real IP address (RIP)
• session ID
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.