Filter
Top Products
352 Maintaining and managing the system
— Manage software versions and activate software upgrades.
—
Shut down or reboot a particular Nortel SNAS device that has
become isolated from the cluster.
— Reset the configuration of a particular Nortel SNAS device back
to factory defaults.
Managing and maintaining the system
To perform maintenance activities, access the Maintenance menu by
using the following command:
/maint
To manage software versions and Nortel SNAS devices, connect to the
particular Nortel SNAS device using Telnet, SSH, or a console connection.
Do not connect to the Management IP address (MIP). Access the Boot
menu by using the following command:
/boot
Roadmap of maintenance and boot commands
The following roadmap lists the CLI commands to perform maintenance
and software and device management activities. Use this list as a quick
reference or click on any entry for more information:
Command
Parameter
/maint log <start-log> <stop-log>
<displaylog> <clearlog>
dumplogs <protocol> <host name or
IP address of server> <filename on
server> <collect info from all cluster
host?>
dumpstats <protocol> <host name or
IP address of server> <filename on
server> <collect info from all cluster
host?>
chkcfg
starttrace <tags> <domain ID> <output
mode>
stoptrace
/cfg/ptcfg <protocol> <host name or
IP address of server> <filename on
server>
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.