Filter
Top Products
222 Managing system users and groups
Step Action
1 Log on to the Nortel SNAS cluster.
In this example the cert_admin user, who is a member of the
certadmin group, will add the admin user to the certadmin
group. The example assumes that the admin user previously
removed himself or herself from the certadmin group, in order
to fully separate the Administrator user role from the Certificate
Administrator user role.
login: cert_admin
Password: ( cert_admin user password)
2 Access the User Menu.
>> Main# /cfg/sys/user
---------------------------------------------------
---------
[User Menu]
passwd - Change own password
list - List all users
del - Delete a user
add - Add a new user
edit - Edit a user
caphrase - Certadmin export passphrase
>> User#
3 Assign the admin user certadmin user rights by adding the admin
user to the certadmin group.
>> User# edit admin
>> User admin# groups/add
Enter group name: certadmin
ATTENTION
A user must be assigned to at least one group at any given time.
If you want to replace a user’s single group assignment, you must
therefore always first add the user to the desired new group, then
remove the user from the old group.
4 Verify and apply the changes.
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.