Nortel Networks 425 series Switch User Manual


 
342 Viewing system information and performance statistics
/info
followed by:
mac <macaddr>|[optio
n]
session information for a client based on a
specified MAC address. You are prompted
to provide the MAC address. The information
includes: the domain ID; the switch ID and port
(in slot/port format); the client’s user name (MAC
address for an IP Phone); the client’s current IP
address; the source MAC address; the date the
client logged on (time is reported if logon was
today); the client device type; the client’s current
VLAN membership; and the Nortel SNAS host IP
address (RIP). The options for device type are
phone or dynamic PC (dn_pc).
The information is the same as that displayed by
the /info/ip command.
sessions [<domain
ID> <switchid/hub>
[<username_prefix>]
]
information about currently active sessions. The
information for each session includes: the domain
ID; the switch ID and port (in slot/port format);
the client’s user name (MAC address for an IP
Phone); the client’s current IP address; the source
MAC address; the date the client logged on (time
is reported if logon was today); the client device
type; the client’s current VLAN membership; and
the portal IP address through which the client
logged on. The options for device type are phone
or dynamic PC (dn_pc).
To restrict the display to a specific domain, enter
the domain ID as part of the command. To restrict
the display to sessions originating from a specific
network access devices, enter the domain ID and
switch ID as part of the command. To restrict the
display to specific clients, enter the domain ID,
switch ID, and user name as part of the command.
Use an asterisk (*) after the user name input to
specify it as a prefix.
groupsessi
<groupname>
information about currently active group sessions.
dhcp [<list> [<addr>
<subnet> <all>]]
[<del> [<addr>
<subnet> <all>]]
<stats>
information about local DHCP leases. For
information, see “Managing local DHCP leases”
(page 122).
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.