Filter
Top Products
278 Configuring system settings
/cfg/sys/dns/servers
followed by:
list
Lists the IP addresses of currently configured
DNS servers, by index number.
del <index number> Removes the specified DNS server from the
system configuration. The index numbers of
the remaining entries adjust accordingly.
To view the index numbers of all configured
DNS servers, use the list command.
add <IPaddr> Adds a DNS server to the system
configuration.
•
IPaddr—the IP address of the DNS server
The system automatically assigns the next
available index number to the server.
You can add up to three DNS servers to the
configuration.
insert <index number>
<IPaddr>
Inserts a server at a particular position in the
list of DNS servers in the configuration.
•
index number—the index number you
want the server to have
• IPaddr—the IP address of the DNS server
you are adding
The index number you specify must be in use.
The index numbers of existing servers with this
index number and higher are incremented by
1.
move <index number> <new
index number>
Moves a server up or down the list of DNS
servers in the configuration.
• index number—the original index number
of the server you want to move
• new index number—the index number
representing the new position of the server
in the list
The index numbers of the remaining entries
adjust accordingly.
To view the index numbers of all configured
DNS servers, use the list command.
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.