Filter
Top Products
Configuring the cluster 281
/cfg/sys/syslog
followed by:
The index number you specify must be in use.
The index numbers of existing servers with this
index number and higher are incremented by
1.
move <index number> <new
index number>
Moves a server up or down the list of syslog
servers in the configuration.
•
index number—the original index number
of the server you want to move
•
new index number—the index number
representing the new position of the server
in the list
The index numbers of the remaining entries
adjust accordingly.
To view the index numbers of all configured
syslog servers, use the list command.
Configuring administrative settings
Administrative settings control the functioning of the CLI. Important
administrative settings include:
•
enabling Telnet access to the CLI
•
enabling SSH access to the CLI (required in order to use the SREM)
• enabling SRS administration to configure the Nortel Health Agent SRS
rules (see “Enabling TunnelGuard SRS administration” (page 284))
•
setting CLI idle timeout
To configure administrative settings for the system, use the following
command:
/cfg/sys/adm
The Administrative Applications menu appears.
The Administrative Applications menu includes the following options:
Nortel Secure Network Access Switch
Using the Command Line Interface
NN47230-100 03.01 Standard
28 July 2008
Copyright © 2007, 2008 Nortel Networks
.