Filter
Top Products
Upgrades 217
Nortel Integrated Conference Bridge Service Implementation Guide
Figure 93
ICB Dashboard – Card Upgrade window
A ports upgrade is purchased from Nortel Networks, it comes with a
new keycode for the card. Follow the steps in Procedure 44 to perform
the port upgrade.
Procedure 44
Upgrade ports from the administrator’s ICB Dashboard
1 From the pull-down menu, select the new number of ports in the combo-box.
The current number of ports appears as view-only above this box.
2 Enter the keycode. The keycode is 24 digits. To simplify input, the system
divides the keycode into three sets of eight digits each.
The system displays the input characters as they are entered.
3 Click on the Submit button.
The system submits the change only if the keycode entry is correct. If the
entry is incorrect, the following message appears: “Keycode is incorrect!
Re-enter the keycode.”
Before clicking on the Submit button, operation can be cancelled by clicking
on the Dashboard button on top of the window.
This procedure is now complete
Note: Ports must be configured in the switch in order for them to be operational.
Firmware Upgrade
Upgrade the ICB Release 4 firmware from the following two sources:
• the secondary PCMCIA device
• a remote FTP server