Filter
Top Products
Installation and configuration 73
Nortel Integrated Conference Bridge Service Implementation Guide
The Installation Wizard consists of four steps, each of which appears
on a separate window. For a new installation, follow the Wizard
step-by-step. For already installed systems, go directly to a specific
window to modify one or more fields. The windows are as follows:
1 Basic Card Settings – use this window when getting started. The
Administrator must enter the time zone of the ICB card.
2 Access Numbers – select the dialing method (that is, direct
meeting or single-number) and enter the DNs according to Meridian
system configuration.
3 Define First User – define at least one user in order to perform
sanity tests, such as scheduling conferences and placing calls. This
step eliminates the need to go to a separate window to define a user
after finishing using the Wizard, just to perform some testing.
Because this step is required only during initial installation, the BUI
excludes it (that is, grays it out) after a successful installation.
Normal user administration is performed from a separate window in
the Administration BUI.
4 Dual Card Meetings – define the parameters for dual-card
meetings. This step appears only in the primary card of a dual-card
ICB configuration.
Conventions
All Installation Wizard windows list the steps on the left of the window.
During installation advance step-by-step by clicking on the Submit &
Continue button. After installation is complete, access a specific step
directly by clicking on its name in the list.
Step 1 – Basic Card Settings
Figure 28 on page 74 shows the Basic Card Settings window. Click on
the Install Wizard link on the ICB Dashboard to access this window.