Filter
Top Products
104 Chapter 6 Command line interface
209564-A
show ports stats pos activealarms
This command displays active alarms on the Passport 8683POS Module port. The
command uses the syntax:
show ports stats pos activealarms [<ports>]
Figure 36 shows output for the show ports stats pos activealarms
command.
MRU Size (in octets) of the largest packet that can be sent or
received on the interface. For IPCP and IPXCP, the
maximum is 1936. When BCP is enabled, however, the
maximum is 1934. Check which NCP is enabled before
configuring the Mru.
Note: The Bridge Control Protocol (BCP) is enabled on the
Passport 8683POS Module by default.
FCS SIZE Sets the length of the redundancy check (fcs) to either 32
or 16.
IPX ROUTE PROTOCOL Sets the protocol for IPX routing.
LQR-QUAL THRESHOLD Indicates the link quality reporting threshold.
LQR-QUAL PERIOD Indicates the link quality reporting interval.
REMOTE IP Indicates the remote iP address.
IPX NET ADDR Indicates the IPX net address.
STATUS OPERATE Operational status.
LCP STATUS Link Control Protocol status.
BRIDGE STATUS Bridging status.
IP STATUS Routing (IP) status.
IPX STATUS Routing (IPX) status
PPP LQSTATUS Point-to-Point status
Table 36 Information fields for output of the show ports info pos all
command (continued)
Field Description