Filter
Top Products
Chapter 3 Installing the Passport 8683POS Module 39
Using the Passport 8683POS Module
Figure 8 Closing the inserter/extractor levers
5 Tighten the retaining screws (Figure 9).
Figure 9 Tightening the retainer screws
6 Connect the interface cables.
You must install at least one MDA on the Passport 8683POS Module in order to
pass traffic. For instructions on installing MDAs, refer to Installing the Passport
8683POS Module MDAs.
For information on configuring and managing the Passport 8683POS Module,
refer to Chapter 4, “Managing the Passport 8683POS Module,” on page 45.
10037FA
10038FA