Filter
Top Products
Chapter 4 Managing the Passport 8683POS Module 55
Using the Passport 8683POS Module
Basic procedures
To change the default settings on the Passport 8683POS Module or to perform any
configuration tasks in Device Manager, select the port you want to configure and
open the Interface tab.
To open the Interface tab:
• Right-click on the port. A shortcut menu opens. Choose Edit.
• Double-click on the port.
The Port dialog box opens with the Interface tab displayed (Figure 14).
This tab displays information about the port and allows you to configure
various elements.
Lock False
Lqr interval 100
Lqr status Enabled
Lqr threshold 95
Magic number True
Oversize frame Disabled
Perform tagging Disabled
Scramble Enabled
Signal-Label (C2) 0x16
Section trace (J0) 1 (0x01)
STP RFC 1638 Enabled
Tagged frame discard Disabled
Unknown MAC discard Disabled
Untagged frame discard Disabled
Device Manager interval 10 seconds
Do one of the following:
Table 9 Passport 8683POS Module default settings (continued)
Parameter Default