Filter
Top Products
98 Chapter 6 Command line interface
209564-A
Table 35 describes the parameters and variables for the config pos stg
command.
Table 35 config pos stg command parameters and variables
config pos info command
The config pos info command shows the current state of the port.
Figure 33 shows a sample of the output from the
config pos info command.
Figure 33 config pos info command sample output
Parameters and variables Description
faststart <enable | disable> Enables or disables the fast start flag.
info Shows the last saved port settings and the next-level CLI commands.
Note that this does not show the current settings, but the last saved
settings.
pathcost <intval> Sets the contribution of this port to the path cost.
priority <intval> Sets the priority of this port.
stg <enable | disable> Enables or disables spanning tree protocol.
Passport-8610:5/config# pos 10/5 info
Port 10/5 :
lock : false
name :
unknown-mac-discard : disable
default-vlan-id : 1
perform-tagging : disable
tagged-frames-discard : disable
untagged-frames-discard : disable
state : up
linktrap : enable
port-type : OC3-MMF
Passport-8610:5/config#