Filter
Top Products
Chapter 6 Command line interface 105
Using the Passport 8683POS Module
Figure 36 show ports stats pos activealarms command output
Table 37 describes the information fields for output for the show ports
stats pos activealarms command.
show ports stats pos felinecurrent
This command displays current statistics on the far end line, which is at the
receiving end. The command uses the syntax:
show ports stats pos felinecurrent [<ports>]
Figure 37 shows sample output for the show ports stats pos
felinecurrent
command.
Table 37 Information fields for output of the show ports stats pos activealarms
command
Field Description
PORT NUM Port number.
ACTIVE ALARM Displays which port has active alarms.
Passport-8610:5/show/ports# stats pos activealarms
=======================================================
Active Alarms
=======================================================
PORT
NUM ACTIVE ALARM
---------------------------------------------------------
10/5 No Defect
10/6 LOS
Passport-8610:5/show/ports/stats/pos#