Filter
Top Products
Chapter 4 Managing the Passport 8683POS Module 65
Using the Passport 8683POS Module
Table 12 describes the POS PPP tab items
4 In the BridgeConfigAdminStatus section, click close to disable bridging.
Table 12 POS PPP tab items
Area Item Description
Link LinkConfigMagicNumber If set to enable, selects a random number (“magic number”)
used in loopback detection. Enable detects loopback; disable
does not detect loopback.
OperStatusLinkMagicNumber Operational value of LinkConfigMagicNumber.
LinkConfigFcsSize Configures the size (in bits) of cyclic redundancy check field
used in PPP frame.
LinkStatusTransmitFcsSize Operational value of LinkConfigFcsSize.
Bridge BridgeAdminConfigStatus This parameter enables or disables bridged traffic with in
PPP.
BridgeOperStatus Operational value of BridgeAdminConfigStatus.
LineConfigPppStp Enables BPDUs to be received or transmitted with BPDU
specific encapsulation. When disabled encapsulated within
Ethernet frames.
IP OperStatusLinePppStp Enables or disables PPP.
IpConfigAdminStatus Enables or disables the IP traffic (link) with in PPP.
IpOperStatus Operational value of IP link.
LineConfigRemoteIPAddr Configured value of remote end IP address.
LineStatusRemoteIPAddr Negotiated value of the remote end IP address.
IPX IpxcpAdminStatus Enables or disables the IPX traffic (link) with in PPP.
IpxOperStatus Operational value of IPX link.
RoutingProtocol Sets the IPX Routing Protocol to none or RIP.
LineStatusIpxRoutingProtocol Negotiated value of RoutingProtocol.
LQR LqrConfigStatus Sets the link quality reporting to enabled or disabled.
OperStatusLqrStatus Negotiated value of LqrConfigStatus.
LqrConfigPeriod Sets the link quality-reporting interval in 100th of a second.
LineStatusLocalPeriod Negotiated value of LqrConfigPeriod.
LineConfigLqrThreshold Sets input quality threshold in percent.
OperStatusLqrThreshold Operational value of LineConfigLqrThreshold.