Filter
Top Products
70 Chapter 4 Managing the Passport 8683POS Module
209564-A
b To assign the POS ports to the VLAN as static members, enter the ports in
the StaticMembers column.
c To assign all other ports to the VLAN as active members, enter the ports
in the ActiveMembers column.
d Enter the POS ports in the NotAllowToJoin column.
e Click Apply.
5 To disable bridging:
a Click the POS PPP tab.
b In the Bridge area, BridgeConfigAdminStatus field, click Close.
6 To enable IPX routing on each selected port:
a Click the POS PPP tab.
b In the IPX area, IpxcpAdminStatus field, click Open.
7 To enable the port on both Passport 8683POS Modules:
a Click the Interface tab.
b In the AdminStatus field, click Up.
8 Click Apply.
SubnetAddr IP subnet address of this VLAN. This value is meaningful only if
rcVlanType is equal to byIpSubnet(2). For other VLAN types it
should have the value 0.0.0.0.
SubnetMask IP subnet mask of this VLAN. This value is meaningful only if
rcVlanType is equal to byIpSubnet(2). For other VLAN types it
should have the value 0.0.0.0.
Table 15 Basic tab fields (continued)
Field Description