Filter
Top Products
58 Chapter 4 Managing the Passport 8683POS Module
209564-A
From the Interface tab, select other POS-specific tabs to configure the port or
change current or default configurations.
LastChange Value of sysUpTime at the time the interface entered its current
operational state. If the current state was entered prior to the last
reinitialization of the local network management subsystem, the value
is zero.
LinkTrap Sets whether or not link Up/link Down traps should be generated for
this interface.
• enabled—sends traps for link up or down
• disabled—does not send traps for link up or down
OperDuplex Current operational duplex of the port (half or full). This will always be
full duplex on a POS port.
OperSpeed Current operating speed of the port. It can be either 155 or 622 Mb/s
depending on the type of interface installed.
MltId Multi-Link Trunk to which the port is assigned (if any).
Locked Displays whether or not the port is locked. When locked, the port
configuration cannot be changed. To lock or unlock a port, select Edit
> Security > Port Lock.
Action Sets one of the following port-related actions:
• none
• flushMacFdb—flush MAC forwarding table for port
• flushArp—flush ARP table for port
• flushIp—flush IP route table for port
• flushAll—flush all tables for port
• triggerRipUpdate—manually update the RIP table
Result Displays results from the last system action.
Table 10 Interface tab items (continued)
Item Description