Filter
Top Products
Chapter 6 Command line interface 95
Using the Passport 8683POS Module
Table 32 config pos ip command parameters and variables
config pos ppp
Use the config pos ppp command to configure Point-to-Point Protocol (PPP)
parameters on the Passport 8683POS Module.
Table 33 describes the parameters and variables for the config pos ppp
command.
Parameters and variables Description
create <ipaddr/mask> <vid>
[mac_offset <value>]
Creates an IP address and assigns it to a VLAN, with the VLAN ID.
delete <ipaddr> Deletes the IP address.
info Shows the last saved port settings and the next-level CLI commands.
Note that this does not show the current settings, but the last saved
settings.